d. Use the cleaning rod to sweep any remaining waste or debris from inside the trimmer into
the trimmer waste container.
e. If you have difficulty sweeping waste into the trimmer waste container, use the cleaning rod
to gather waste, then remove the waste by hand.
f. Return levers 3a and 3d to their original positions.
6. To ensure that all waste and debris is removed, especially beneath the frame that is located
behind the container, use the cleaning rod to remove any remaining waste from inside the
trimmer.
For information, refer to Emptying the Crease and Two-Sided Trimmer Waste Container.
7. Close the trimmer upper and lower covers.
8. If the press indicates there are additional paper jams, follow the instructions to clear the paper
and to resume printing.
CCrreeaassee aanndd TTwwoo--SSiiddeedd TTrriimmmmeerr FFaauulltt MMeessssaaggeess
When a fault occurs, such as paper jams, open doors or covers, or a press malfunction, the press stops
printing and a message appears on the press touch screen. A graphical illustration shows the location
of the fault with a brief explanation of corrective actions for clearing the fault. If a fault occurs in
more than one location, the illustration changes to indicate the multiple locations and the required
corrective actions.
The touch screen also displays a Faults button which provides information about the fault and
detailed instructions for correcting the fault. The (E) code on the upper-left part of the Fault message
displays which error indicator is lit on the Crease and Two-Sided Trimmer indicator panel (E1–E7).
Xerox
®
Versant
®
4100 Press
User Documentation
387
Troubleshooting
To Next Page
Loading...
