Top Tray Aligner Accessory
The Xerox Top Tray Aligner Accessory is an additional component for the top tray of the Production
Ready Finishers. This accessory improves the stack quality of the Production Ready Finishers. The Top
Tray Aligner Accessory aligns any small-size stock that goes on the top tray, such as small sheets,
postcards, and envelopes.
To install the Top Tray Aligner Accessory on a Production Ready Finisher, do the following:
1. Empty the top tray of the Production Ready Finisher.
2. Place the Top Tray Aligner Accessory on the top tray of the PR Finisher. Adjust the alignment
between the top tray and the Tray Aligner Accessory.
Xerox
®
Versant
®
4100 Press
User Documentation
207
Working With
To Next Page
Loading...
