Xerox Versant 4100 Press - Fault Messages on the Interface Decurler Module; Fault Code Information on the Interface Decurler Module; Inserter Module Troubleshooting; Inserter Paper Jams

FFaauulltt MMeessssaaggeess oonn tthhee IInntteerrffaaccee DDeeccuurrlleerr MMoodduullee
When a fault occurs, such as paper jams, open doors or covers, or a press malfunction, the press stops
printing and a message appears on the press touch screen. A graphical illustration shows the location
of the fault with a brief explanation of corrective actions for clearing the fault. If a fault occurs in
more than one location, the illustration changes to indicate the multiple locations and the required
corrective actions.
The touch screen also displays a Faults button which provides information about the fault and
detailed instructions for correcting the fault.
Fault Code Information on the Interface Decurler Module
When a fault occurs, such as paper jams, open doors or covers, or a press malfunction, the press stops
printing and a message appears on the press touch screen.
The touch screen also displays a Faults button which provides information about the fault and
detailed instructions for correcting the fault.
Tip: Interface Decurler Module faults are identified by the codes which start with the three-
digit number 048.
IInnsseerrtteerr MMoodduullee TTrroouubblleesshhoooottiinngg
IInnsseerrtteerr PPaappeerr JJaammss
The following occurs when there is a fault, such as paper jams, open doors or covers, or a press
malfunction:
Xerox
®
Versant
®
4100 Press
User Documentation
357
Troubleshooting