Xerox Versant 4100 Press - SquareFold Trimmer Fault Code Information; Guidelines for Using the SquareFold Trimmer Device; Full-Page Images on Booklets

SquareFold
®
Trimmer Fault Code Information
When a fault occurs, such as paper jams, open doors or covers, or a press malfunction, the press stops
printing and a message appears on the press touch screen.
The touch screen also displays a Faults button which provides information about the fault and
detailed instructions for correcting the fault.
Tip: SquareFold
®
Trimmer faults are identified by the codes which start with the three-digit
number 013.
GGuuiiddeelliinneess ffoorr UUssiinngg tthhee SSqquuaarreeFFoolldd
®®
TTrriimmmmeerr DDeevviiccee
Full-Page Images on Booklets
When using full-page images, ensure that the finished booklet size accommodates any full-page
images and that when the booklet is trimmed, these images are not truncated.
The following are examples of a booklet with preprinted front/back covers with a full-page image but
different sizes:
422
Xerox
®
Versant
®
4100 Press
User Documentation
Troubleshooting