Xerox Versant 4100 Press - Loading Envelopes in Tray 5 (Bypass)

7. Load the envelopes SEF on top of the plastic inserts, with the flaps closed and facing down.
Note: The flaps should always be down and positioned along the front of the tray.
8. Adjust the paper guides against the stock.
9. Close the paper tray and confirm the new settings at the print server.
10. Run your print job.
11. Upon completion of your print job, remove the envelope stock and the envelope supply kit
components from the tray.
12. Place the envelope supply kit components into storage.
13. Store the remaining envelopes in their original packaging.
Loading Envelopes in Tray 5 (Bypass)
Load envelopes in Tray 5 in the short edge feed (SEF) or long edge feed (LEF) direction.
Loading Envelopes in Tray 5 in the SEF Direction
When you load envelopes in the SEF direction, ensure that the flaps are closed and face down and
position the flaps along the front of the tray.
Xerox
®
Versant
®
4100 Press
User Documentation
85
Working With