Xerox Versant 4100 Press - C-Fold Adjustment Procedure

12. Select the correct the bi-fold position for the multiple stapled sheets option:
• Left Side of Fold is Longer: Use the Up and Down Arrow buttons and enter the
measurement value that you obtain during the previous step in the A Length window. The
left side of the fold is the one with the printed arrow on it.
• Right Side of Fold is Longer: Use the Up and Down Arrow buttons and enter the
measurement value that you obtain during the previous step in the A Length window.
• Left and Right Sides are Equal
13. Select the desired staple position option:
• Left of Fold
• Right of Fold
• On the Fold
14. Use the Up and Down Arrow buttons and enter the measurement value that you obtain during
the previous step in the A Length window the B Length window.
15. Use Up and Down Arrow buttons and select the desired Trim and Skew Correction settings.
Note: The Trim selection is available only when the press is connected to an optional
booklet maker finisher and an optional trimmer device.
16. Run more test prints to ensure that the fold and staple positions are now correct.
a. Select the Test Print button.
b. Select the desired tray.
c. If you use the Trim or Skew Correction settings, ensure that On is selected for the Test Print
Trim option.
d. Select the Start button.
e. Obtain the printed samples from the output area of the press.
f. Measure the sample output and record both bi-fold positions on a sheet of paper.
g. Select the correct the bi-fold position for the multiple sheets option.
h. Select the desired staple position option.
i. Repeat the previous steps until the desired output is achieved.
17. When the desired output is achieved, select OK to save and close the Fold Adjustment Profile.
Note: After multiple attempts, if acceptable output cannot be achieved, select OK to save
and close the profile. For further assistance, contact the Customer Support Center.
C-Fold Adjustment Procedure
Note: The C and Z Fold Adjustments are available with a C/Z Folder device.
1. From the PredictPrint Media Manager main window, select Profiles.
The Profiles window appears.
2. Select the Fold Adjustment tab.
The Fold Adjustment option appears.
Xerox
®
Versant
®
4100 Press
User Documentation
151
Working With