2. Move the lever 1d upward and remove the jammed paper.
Note: If paper is torn, check inside the machine and remove it.
3. If the paper cannot be removed, turn the knob 1c clockwise, then remove the jammed paper.
4. Return the lever 1d to the original position.
5. Close the front door of the feeder module.
Note: If the front cover of the feeder module is not completely closed, a message will
appear and the press
will not operate.
TTrraayyss 88//99 FFaauulltt MMeessssaaggeess
When a fault occurs, such as paper jams, open doors or covers, or a press malfunction, the press stops
printing and a message appears on the press touch screen. A graphical illustration shows the location
of the fault with a brief explanation of corrective actions for clearing the fault. If a fault occurs in
more than one location, the illustration changes to indicate the multiple locations and the required
corrective actions.
The touch screen also displays a Faults button which provides information about the fault and
detailed instructions for correcting the fault. The (E) code on the upper-left part of the Fault message
displays which error indicator is lit on the Trays 8/9 indicator panel (E1–E7).
Trays 8/9 Fault Code Information
When a fault occurs, such as paper jams, open doors or covers, or a press malfunction, the press stops
printing and a message appears on the press touch screen.
The touch screen also displays a Faults button which provides information about the fault and
detailed instructions for correcting the fault.
352
Xerox
®
Versant
®
4100 Press
User Documentation
Troubleshooting
To Next Page
Loading...
