Xerox Versant 4100 Press - Loading Postcards in Tray 5 (Bypass); Envelopes; Guidelines for Printing on Envelopes; Supported Envelope Sizes

10. Store the postcard bracket by inserting it into the storage area on the left side of the tray (1) and
tightening the screw (2).
Loading Postcards in Tray 5 (Bypass)
Load postcards SEF, with the side to be printed on facing up.
EEnnvveellooppeess
Guidelines for Printing on Envelopes
For envelope guidelines and limitation information, refer to the Customer Expectation and
Installation Guide.
Supported Envelope Sizes
For supported envelope sizes, refer to the Customer Expectation and Installation Guide.
Loading Envelopes in Trays 6 and 7 with the Postcard Bracket
Note: Install the postcard bracket before printing envelopes.
1. Slowly open one of the paper trays until it stops and remove the paper.
80
Xerox
®
Versant
®
4100 Press
User Documentation
Working With