c. If you use the Trim settings, ensure that On is selected for the Test Print Trim option.
d. Select the Start button.
e. Obtain the printed samples from the output area of the press.
f. Measure the sample output and record the bi-fold position on a sheet of paper.
g. Select the correct the bi-fold position for the multiple sheets option.
h. Repeat the previous steps until the desired output is achieved.
15. When desired output is achieved, select OK to save and close the Fold Adjustment Profile.
Note: After multiple attempts, if acceptable output cannot be achieved, select OK to save
and close the profile. For further assistance, contact the Customer Support Center.
Bi-Fold Multiple Sheets Stapled Adjustment Procedure
Note: The Bi-Fold Multiple Sheets Stapled Adjustment feature is available with an optional
finisher with a booklet maker.
1. From the PredictPrint Media Manager main window, select Profiles.
The Profiles window appears.
2. Select the Fold Adjustment tab.
The Fold Adjustment option appears.
3. Select either the New or Edit button.
If you are editing an existing fold adjustment, select the desired profile from the list and then
select the Edit button.
The [New or Existing] Profile Properties window opens.
4. Type in a new name, or if desired, edit the existing name.
It is recommend that you use a name such as Single Fold Plain or something that indicates
the fold type.
5. From the drop-down menu, select the Bi-Fold Multiple Sheets Stapled Fold Type.
6. Select desired settings such as Size, Coating, and Weight.
7. Select the Test Print button.
The Fold Adjustment - Test Print window displays.
8. For the Trim option, ensure that Off is selected.
Note: The Trim selection is available only when the press is connected to an optional
booklet maker finisher and an optional trimmer device.
9. Select the desired tray, and then select the Start button.
When the test prints complete, the [New or Existing] Profile Properties window reopens.
Note: This screen varies depending on the selected Fold Type.
10. Obtain the printed samples from the output area of the press.
11. Measure the sample output and record the bi-fold position on a sheet of paper.
150
Xerox
®
Versant
®
4100 Press
User Documentation
Working With
To Next Page
Loading...
