1 Sided-Face Up
Use this option to select the desired paper curl settings for one-sided print jobs that exit the
machine in the face-up position.
1 Sided-Face Down
Use this option to select the desired paper curl settings for 1-sided print jobs that exit the machine
in the face down position.
2 Sided
Use this option to select the desired paper curl settings for 2-sided print jobs.
Edit Settings
Additional settings are available for each of the three Paper Curl Correction options by selecting
Edit Settings. These additional settings include both the preset and custom settings, and use
lookup tables for curl control that are based on the percentage of toner area coverage of the job
and the humidity values in the room where the press sits.
If you select the Edit Settings button, it opens the Paper Curl Correction Test Print window
which displays additional settings that include preset and custom selections.
PPaappeerr CCuurrll CCoorrrreeccttiioonn TTeesstt PPrriinntt
The Paper Curl Correction Test Print includes the following options and settings:
• Default: This is the system preset value. The press uses this setting to determine the amount of
pressure needed automatically at the different decurlers to reduce the output curl of the paper.
Always use this setting first before using other custom settings.
• Types A, B, and C
• Custom Curl Correction
• Test Print Button for Paper Curl Correction
Refer to the latest stock and paper guidelines for the press for the recommended paper types and
weights. For more information, refer to Downloading Current Media Information.
Important: Always run several test prints, evaluate the output, and if necessary, readjust the
values before you run the entire print job. This ensures that the desired output is achieved.
Types A, B, and C
Types A, B, and C are system default settings; the following list defines each type:
• Type A uses a preset system Look-Up Table (LUT) to evaluate and correct media which has a
Severe (Large) Upward curl.
• Type B uses a preset system Look-Up Table (LUT) to evaluate and correct media which has an
intermediate curl, Moderate (Small), or Medium, Upward, or Downward curl.
• Type C uses a preset system Look-Up Table (LUT) to evaluate and correct media which has a
Severe (Large) Downward curl.
These preset options offer an alternative to creating and using a customized setting. Using one of the
preset Types A, B, or C settings usually eliminate the problem.
Always use these settings first before you use a customized setting. However, due to the broad range
of paper variables, image coverage, and environmental factors, these default settings do not result in
Xerox
®
Versant
®
4100 Press
User Documentation
131
Working With
To Next Page
Loading...
