Other information to remember includes:
• From a cold start, either power on or power saver, the system takes less than five minutes to
start printing.
• From standby mode, the system usually takes less than one minute to start printing.
PPrriinntt OOuuttppuutt CCoonnttaaiinnss CCoorrrruupptteedd TTeexxtt
Problem
Print output contains corrupted text, or the text prints incorrectly.
Solution
Check the application or print driver settings on whether non-standard fonts are being used for
printing.
TTrraayyss DDoo NNoott RReeccooggnniizzee tthhee MMeeddiiaa
Problem
Trays do not recognize the media.
Solution
• Access the PredictPrint Media Manager App and verify the paper settings for the tray.
• Check the print server settings.
• Check that the paper is loaded correctly as short-edge feed (SEF) or long-edge feed (LEF) and
ensure it matches the paper settings programmed at the print server.
PPrriinnttss AArree NNoott oonn DDeessiirreedd PPaappeerr SSiizzee
Problem
Prints are not on the desired paper size.
Solution
• Ensure that the correct paper size and type is loaded in the paper trays.
• Set the paper guides to the correct positions.
• Select the paper size, tray and weight at the print server and ensure these paper attributes are
set correctly at the Tray Properties window.
• Ensure that Fit to Paper or an equivalent selection is not selected in your print driver.
PPaappeerr JJaammss oorr WWrriinnkklleess iinn tthhee FFuusseerr AArreeaa
Problem
Paper jams or wrinkles in the fuser area.
288
Xerox
®
Versant
®
4100 Press
User Documentation
Troubleshooting
To Next Page
Loading...
