Xerox Versant 4100 Press - Additional HCS Troubleshooting Information; Hints and Tips for Using the High Capacity Stacker (HCS)

AAddddiittiioonnaall HHCCSS TTrroouubblleesshhoooottiinngg IInnffoorrmmaattiioonn
Hints and Tips for Using the High Capacity Stacker (HCS)
Refer to the following hints and tips when using the HCS:
1. Check the paper in the applicable HCS tray for curl.
a. If no curl is present and if the output is acceptable and meets customer satisfaction, you are
finished.
b. If no curl is present and if the output is not acceptable, call for service.
c. If curl is present, continue to the next step.
2. To correct the paper curl, use the paper curl correction controls on the top of the Interface
Decurler Module (IDM).
3. If the output has not improved, adjust the paper curl again.
4. If the output still has not improved, call the Customer Support Center.
372
Xerox
®
Versant
®
4100 Press
User Documentation
Troubleshooting