5. Return lever 1a to its original position.
6. Close the Inserter front cover.
IInnsseerrtteerr FFaauulltt MMeessssaaggeess
When a fault occurs, such as paper jams, open doors or covers, or a press malfunction, the press stops
printing and a message appears on the press touch screen. A graphical illustration shows the location
of the fault with a brief explanation of corrective actions for clearing the fault. If a fault occurs in
more than one location, the illustration changes to indicate the multiple locations and the required
corrective actions.
The touch screen also displays a Faults button which provides information about the fault and
detailed instructions for correcting the fault. The (E) code on the upper-left part of the Fault message
displays which error indicator is lit on the Inserter control panel (E1, E2, E3).
Inserter Fault Code Information
When a fault occurs, such as paper jams, open doors or covers, or a press malfunction, the press stops
printing and a message appears on the press touch screen.
The touch screen also displays a Faults button which provides information about the fault and
detailed instructions for correcting the fault.
Tip: Inserter faults are identified by the codes which start with the three-digit numbers 012,
013, and 024.
362
Xerox
®
Versant
®
4100 Press
User Documentation
Troubleshooting
To Next Page
Loading...
