Xerox Versant 4100 Press - Using the Manual Adjustment Option for Secondary Transfer Voltage Adjustment

b. Sides Imaged: Side 1 or Sides 1 and 2
c. Color Mode
d. Do not enter a Change Percentage value for either Side 1 or Side 2
6. Select Start.
The press generates 16 patches on a single test print:
• Patches 1–10 have more bias applied to them (more transfer voltage)
• Patches -1 through -5 have less bias applied to them (less transfer voltage)
• Patch 0 is the median range; this is the default value
7. Retrieve the test print from the output area of the press. Continue to the next step.
8. On the Test Print - Secondary Transfer Voltage Auto Adjustment second window, select Bias
Acceptable.
The window closes and displays Advanced Stock Setup.
9. To save and close the Advanced Stock Setup window, select OK.
10. To save and close the Stock Properties window, select OK.
Using the Manual Adjustment Option for Secondary Transfer Voltage Adjustment
1. Perform one of the following:
• Copy an existing stock entry. Refer to Copying a Stock Entry.
• Modify or edit an existing stock entry. Refer to Editing an Existing Stock in the Stock Library.
2. From the Stock Properties window, select and modify the stock attributes as required, including
entering a new or revised stock name, selecting a stock size, color, and other attributes.
If using the Secondary Transfer Voltage Adjustment option, customize the stock name or include
information in the Comment section to identify the usage of this option. For example name the
stock Custom STVAdj_Manual or add a comment stating This custom stock is using
Secondary Transfer Voltage Manual Adjustment.
3. Select Advanced Setup.
The Advanced Stock Setup window opens.
4. For Secondary Transfer Voltage Adjustment, select Manual.
The Test Print - Secondary Transfer Voltage Manual Adjustment window opens.
5. Select the following settings:
a. Paper tray
b. Sides Imaged: Side 1 or Sides 1 and 2
c. Color Mode
d. When running a test print for the first time, there is no need to enter a Change Percentage
value for either Side 1 or Side 2
6. Select Start.
The press generates 16 patches on a single test print:
• Patches 1–10 have more bias applied to them (more transfer voltage)
• Patches -1 through -5 have less bias applied to them (less transfer voltage)
• Patch 0 is the median range; this is the default value
128
Xerox
®
Versant
®
4100 Press
User Documentation
Working With