Output Trays
1. Finisher Output Tray: Unused sheets that are purged by the press are ejected to this output tray.
2. Booklet Tray: Saddle Stitch/Bi-fold and Trim/Square-fold jobs are delivered only to this tray.
Control Panel
Number
Description
1 Fault indicators: These indicators light when a fault or jam occurs in a particular
area of the SquareFold
®
Trimmer device. The lower indicator (with the lock icon)
lights when the trimmer waste container is pulled out or when it is full.
Note: If El, E2, or E3 is lit, the left and right covers can be opened and the
jam or fault cleared. Otherwise, during normal operation or when the press
is idle, the covers cannot be opened.
2 Select the desired square-fold setting; for more information refer to the Square
Fold Adjustment Settings.
3 Press this button to adjust the square-fold, book thickness setting.
Xerox
®
Versant
®
4100 Press
User Documentation
215
Working With
To Next Page
Loading...
