Xerox Versant 4100 Press - Replacing the Booklet Staple Cartridge for Saddle Stitching

4. Insert a new staple cartridge into the unit.
5. Insert the unit to its original position.
6. Close the finisher front cover.
Replacing the Booklet Staple Cartridge for Saddle Stitching
Note: Ensure that the press is not running before performing this procedure.
Note: This procedure is applicable only or the PR Booklet Maker Finisher.
1. Open the finisher front cover.
276
Xerox
®
Versant
®
4100 Press
User Documentation
Working With