HHoollee--ppuunncchheedd PPaappeerr
Guidelines for Printing on Hole-punched Paper
Hole-punched paper is defined as having two or more holes along one edge for use in ring binders
and notebooks.
Always refer to the following guidelines before using hole-punched paper:
• Paper with punched holes can be printed from all trays.
• Hole-punched paper can be loaded in the LEF or portrait or SEF or landscape direction.
• Position the holes along the feed edge, as shown on the image on the front of the tray.
• Load hole-punched paper with the side to be printed on facing up.
• To prevent jams or damage, ensure that no plugs (pieces cut out of the paper to create the holes)
remain in the stack.
Loading Hole-punched Paper in Trays 1, 2, and 3
Load and align the edge of the hole-punched paper with the holes against the left edge of the tray.
Loading Hole-punched Paper in Trays 6 and 7
Long-edge (LEF) Feed Direction
Load and align the paper against the right side of the tray for LEF direction.
Xerox
®
Versant
®
4100 Press
User Documentation
71
Working With
To Next Page
Loading...
