Xerox Versant 4100 Press - Page 149

3. Select either the New or Edit button.
If you edit an existing fold adjustment, select the desired profile from the list and then select the
Edit button.
The [New or Existing] Profile Properties window opens.
4. Type a new name, or if desired, edit the existing name.
It is recommend that you use a name such as Single Fold Plain or something that indicates
the fold type.
5. From the drop-down menu, select the Bi-Fold Multiple Sheets Fold Type.
6. Select desired settings such as Size, Coating, and Weight.
7. Select the Test Print button.
The Fold Adjustment - Test Print window appears.
8. For the Trim option, ensure that Off is selected.
Note: The Trim selection is available only when the press is connected to an optional
Production Ready Booklet Maker Finisher and an optional trimmer device.
9. Select the desired tray, and then select the Start button.
After the test prints complete, the [New or Existing] Profile Properties window reopens.
Note: This screen varies depending on the selected Fold Type.
10. Obtain the printed samples from the output area of the press.
11. Measure the sample output and record the bi-fold position on a sheet of paper.
12. Select the correct the bi-fold position for the multiple sheets option:
• Left Side of Fold is Longer: Use the Up and Down Arrow buttons and enter the
measurement value that you obtain during the previous step in the A Length window. The
left side of the fold is the one with the printed arrow on it.
• Right Side of Fold is Longer: Use the Up and Down Arrow buttons and enter the
measurement value that you obtain during the previous step in the A Length window.
• Left and Right Sides are Equal
When you use the Up and Down Arrow buttons to adjust the fold position, the fold image
changes to show the new fold position.
13. To select the desired settings, use the Up and Down Arrow buttons and first select Adjust
Position, then enter the correct fold positions.
Note: The Trim selection is available only when the press is connected to an optional
Production Ready Booklet Maker Finisher and an optional trimmer device.
14. Run more test prints to ensure that the fold position is now correct.
a. Select the Test Print button.
b. Select the desired tray.
Xerox
®
Versant
®
4100 Press
User Documentation
149
Working With