5. Locate the larger of the plastic pieces and place it in the bottom of the tray so that it fits around
the ends of the inboard paper guide.
6. Locate the shorter plastic piece install it in the tray:
a. Place the shorter plastic piece in the bottom of the tray so that it fits along the right side of
the tray and into the corner, to the right of the envelope bracket that you installed.
b. Place the magnet at the end of the piece into the corner of the tray and facing down.
The raised portion of the piece at the other end should be facing up and on top of the cork
pad on the tray bottom.
84
Xerox
®
Versant
®
4100 Press
User Documentation
Working With
To Next Page
Loading...
