Xerox Versant 4100 Press - Page 145

A Bi-Fold has one fold which creates two panels to the output. Bi-Fold (Single Sheet) output is
delivered to the Booklet Output Tray.
Bi-Fold Multiple Sheets and Bi-Fold Multiple Sheets Stapled
Multiple sheets or multiple sheets with staples can also be added to a Bi-Fold adjustment.
C-Fold
A C-Fold has two folds which creates a three-panel output. C-Fold output is delivered to the C/Z
Folder Output Tray.
Z-Fold
A Z-Fold has two folds that are folded in opposite directions, resulting in a type of fan fold. Z-Fold
output is delivered to the C/Z Folder Output Tray.
Z-Fold Half Sheet
As with a regular Z-Fold, the Z-Fold Half Sheet has two folds that are folded in the opposite
directions. The difference between a regular Z-Fold and a Z-Fold Half Sheet is that the half sheet is
not folded in two equal folds. The two folds are unequal which allows one edge of the Z-Fold Half
Sheet to have a longer edge. The longer edge allows for stapling or hole punching. Z-Fold Half
Sheet output is delivered to the C/Z Folder Output Tray.
If the press is equipped with the optional Crease and Two-Sided Trimmer device, extra fold and
Xerox
®
Versant
®
4100 Press
User Documentation
145
Working With