4. On the tray, slide the rear paper-feed adjustment lever to the right.
5. Close the tray by slowly pushing it in until it comes to a stop.
6. Run your print job.
7. After the print job finishes, open the tray and return the rear paper-feed adjustment lever to its
default position by sliding it to the left.
Leave the tray open and continue to the next step.
8. Retrieve and evaluate the printed output; choose one of the following:
• The paper is fed accurately without skew and the printed output is satisfactory. Close the tray
and your task is completed.
• The paper is skewed and the printed output is unsatisfactory; proceed to the next step.
9. Adjust the right-side paper-feed lever:
a. On the tray, slide the right-side paper-feed adjustment lever toward the rear of the tray.
Xerox
®
Versant
®
4100 Press
User Documentation
169
Working With
To Next Page
Loading...
