5. Load the envelope in the short-edge-feed (SEF) or long-edge-feed (LEF) direction:
• When loading envelopes SEF, ensure the flaps are closed and face down and position the
flaps along the front of the tray.
• When loading envelopes LEF, ensure the flaps are closed and face down and position the flaps
along the right of the tray.
6. Adjust the paper guides against the stock.
7. Close the paper tray and confirm the new settings at the print server.
8. Run your print job.
9. Upon completion of your print job, remove the remaining envelopes and the postcard bracket
from the tray.
10. Store the postcard bracket by inserting it into the storage area on the left side of the tray (1) and
tightening the screw (2).
11. Store the remaining envelopes in their original packaging.
82
Xerox
®
Versant
®
4100 Press
User Documentation
Working With
To Next Page
Loading...
