Xerox WorkCentre 7132 User Guide

Transmission Options - Fax
Xerox WorkCentre 7132 User Guide 105
Send Header – page 107
Recipient Print Sets – page 108
Multiple-Up – page 108
Remote Mailbox – page 108
F Code – page 109
1. Press the <All Services> button
on the control panel.
2. Select [Fax] on the touch
screen.
3. Select the [Transmission
Options] tab. Use the side tabs
to switch screens.
4. Select the required feature.
Transmission Report
This feature automatically prints a report after each fax transmission indicating the
transmission result.
1. Select [Transmission Report] on
the [Transmission Options]
screen.
2. Select the required option.
3. Select [Save].
Off
Disables the feature.
On
Automatically prints a report after each fax transmission is completed.
Communication Mode
This feature allows you to select the communication mode for fax transmissions.
1. Select [Communication Mode]
on the [Transmission Options]
screen.
2. Select the required option.
3. Select [Save].
Downloaded From ManualsPrinter.com Manuals

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English