Xerox WorkCentre 7132 User Guide

Paper Supply
Xerox WorkCentre 7132 User Guide 435
NOTE: The standard sizes of documents that can be detected vary depending on the
paper size table specified by the Key Operator. For information on setting the paper
size table, refer to Paper Size Settings in the Setups chapter on page 234.
Paper Supply
NOTE: The standard sizes of documents that can be detected vary depending on the
paper size table specified by the Key Operator. For information on setting the paper
size table, refer to Paper Size Settings in the Setups chapter on page 234.
Trays 1, 2 & 3 (Two Tray Module)
Capacity: 520 sheets of 80 g/m
2
(20 lb bond) paper per tray
Paper Weights: 60 to 105 g/m
2
for Tray 1 and 60 to 216* g/m
2
for Trays 2 and 3
Paper Sizes: For width: 148 to 297 mm (5.8 to 11.7”) / for length: 210 to 432 mm (8.2
to 17.0”).
Auto Size Sensing: Yes
*:Depending on the type of paper used and the operating environment, paper may not
feed to the machine properly or print quality may be negatively affected.
Tray 5 (Bypass)
Capacity: Approximately 97 sheets of 80 g/m
2
(20 lb bond**) paper
**: Using standard paper 4200 3R2047.
NOTE: The paper stack height must not exceed 10 mm (0.4 inches).
Paper Weight: 60 to 216* g/m
2
Standard Paper Sizes: For width: 128 to 297 mm (5.0 to 11.7”) / for length: 99 to 432
mm (3.9 to 17.0”).
Custom Paper Sizes: For width: 89 to 297 mm (3.5 to 11.7”) / for length: 99 to 432 mm
(3.9 to 17.0”).
Auto Size Sensing: Yes
Tray 2, 3 (Tandem Tray Module)
Capacity:
Tray 2 (Left-hand tray): approximately 900 sheets of 80 g/m
2
(20 lb bond) paper
Tray 3 (Right-hand tray): approximately 1,180 sheets of 80 g/m
2
(20 lb bond) paper
Paper Weight: 80 g/m
2
(20 lb bond) paper
Paper Sizes: B5 LEF/A4 LEF/7.25 × 10.5” LEF/8.5 × 11” LEF
Paper Weight: 60 to 216* g/m
2
Downloaded From ManualsPrinter.com Manuals

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English