Xerox WorkCentre 7132 User Guide

Network Settings
Xerox WorkCentre 7132 User Guide 253
HTTPS Proxy Server Authentication
Specifies whether to enable HTTPS proxy server authentication.
HTTPS Proxy Server Login Name
Specifies the HTTPS proxy server login name.
HTTPS Proxy Server Password
Specifies the HTTPS proxy server password. Enter a password and then re-enter the
password for confirmation.
Outgoing/Incoming E-mail Settings
This feature allows you to set the outgoing and incoming mail server settings.
1. Select [Outgoing/Incoming E-
mail Settings] on the [Network
Settings] screen.
2. Change the required settings.
3. Select [Close].
POP3 Server Settings
Specifies the POP3 server settings. Use the scroll bars to switch between screens.
POP3 Server Setup
Specifies the setup method for the POP3 server.
POP3 Server IP Address
Specifies the POP3 server IP address. This entry is required only when [By IP Address]
is selected on the [POP3 Server Setup] screen.
POP3 Server Name
Specifies the POP3 server name. Enter a server name of up to 64 characters. This
entry is required only when [By Server Name] is selected on the [POP3 Server Setup]
screen.
POP3 Server Port Number
Specifies the POP3 server port number.
POP3 Server Check Interval
Specifies the POP3 server interval to poll the POP3 server. Enter a time in the range
of 1 to 120 minutes.
POP3 Server Login Name
Specifies the POP3 server login name. Enter a login name of up to 64 characters.
Downloaded From ManualsPrinter.com Manuals

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English