Xerox WorkCentre 7132

3 Copy
62 Xerox WorkCentre 7132 User Guide
Color Shift
This feature allows you to adjust the hue of the colors to be reproduced in the copy by
a maximum of two levels in two directions. All colors in the document are shifted by the
same amount.
The color of the original document is represented by the [Before] slider on the [Color
Shift] screen, and the color of the output copy is represented by the [After] slider.
When the [Before] slider shifts to the left, yellows become slightly more reddish, greens
slightly more yellowish, and similarly for all four colors. Conversely, when the [Before]
slider shifts to the right, reds become slightly more yellowish, yellows slightly more
greenish, and similarly for all four colors.
NOTE: This feature is only available when the output color is set to [Auto Detect] or
[Color] in the [Output Color] feature on the [Copy] screen.
1. Select [Color Shift] on the
[Image Quality] screen.
2. Set the required option.
3. Select [Save].
Coolest
Shifts the [Before] color slider two steps to the left.
Cool
Shifts the [Before] color slider one step to the left.
Normal
No color shift is applied.
Warm
Shifts the [Before] color slider one step to the right.
Warmest
Shifts the [Before] color slider two steps to the right.
Downloaded From ManualsPrinter.com Manuals