Xerox WorkCentre 7132 User Guide

Network Settings
Xerox WorkCentre 7132 User Guide 255
Domain Filter
Specifies domain name restrictions to filter incoming e-mail.
Domain Filtering
Specifies whether to enable domain filtering, and the type of filtering. Select from [Enter
Permitted Domain Names] and [Enter Rejected Domain Name] to enable filtering.
Domain 1 to 50
Specifies the domain names to be restricted or permitted according to the selection on
the [Domain Filtering] screen.
Remote Server/Directory Service
This feature allows you to set up the external authentication server and directory
service settings. The options available may vary depending on your machine
configuration.
1. Select [Remote Server/Directory
Service] on the [Network
Settings] screen.
2. Change the required settings.
3. Select [Close].
Authentication System
Specifies the remote authentication service. Select from [Kerberos (Windows 2000)],
[Kerberos (Solaris)], [LDAP], and [SMB].
Kerberos Servers Settings
Specifies the Kerberos servers. The following parameters are available for each
Kerberos server. Use the scroll buttons to switch between screens.
Kerberos Server 1 to 5
• Primary Server Setup - Specifies the setup method for the primary server.
• Primary Server IP Address - Specifies the primary server IP address. This entry is
required only when [By IP Address] is selected on the [Primary Server Setup]
screen.
• Primary Server Name - Specifies the primary server name. Enter a server name of
up to 255 characters. This entry is required only when [By Server Name] is selected
on the [Primary Server Setup] screen.
• Primary Server Port Number - Specifies the primary server port number.
• Secondary Server Setup - Specifies the setup method for the secondary server.
Downloaded From ManualsPrinter.com Manuals

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English