Xerox WorkCentre 7132 User Guide

Login Setup/Auditron Administration
Xerox WorkCentre 7132 User Guide 301
User Details Setup
This feature allows you to configure the settings for user ID authentication.
1. Select [User Details Setup] on
the [Login Setup/Auditron
Administration] screen.
2. Select the required options.
3. Select [Save].
User ID Characters
Displays the screen keyboard. Enter a name to be displayed on the touch screen, the
browsing screen of the CentreWare Internet Services, or printed on reports, instead of
a user ID. This name can be up to 15 characters long.
Hide User ID
Specifies whether a user ID is to be displayed or hidden when it is entered.
Failed Access Log
Displays the [Failed Access Log] screen. This feature allows you to specify the number
of authentication failures within a certain period before the attempt is logged as an
error.
1. Select [Failed Access Log] on
the [User Details Setup] screen.
2. Select [On] to enable the
feature.
• Failed Attempts - Enter the maximum number of authentication failures to be
allowed using the numeric keypad on the control panel.
Charge Print Settings
This feature allows you to specify how to treat the print jobs that are received when the
machine is in the Auditron Administration mode.
1. Select [Charge Print Settings]
on the [Login Setup/Auditron
Administration] screen.
2. Change the required settings.
3. Select [Close].
Receive Control
Specifies the receive control for externally submitted jobs.
Downloaded From ManualsPrinter.com Manuals

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English