Xerox WorkCentre 7132 User Guide

4 Fax/Internet Fax
106 Xerox WorkCentre 7132 User Guide
G3 Auto
Select this mode if the remote machine is G3 compatible. This mode is the one usually
selected. The machine automatically switches modes depending on the capabilities of
the remote machine.
F4800
Select this mode when transmitting over noisy or bad telephone lines, for example
when sending international faxes. Can also be useful for transmitting over poor
telephone lines domestically.
Priority Send/Delayed Start
These features allow you to set the priority and start time for fax and polling jobs.
Although you can set [Delayed Start] in combination with [Priority Send], a fax will be
sent at the time specified using the [Delayed Start] option.
1. Select [Priority Send/Delayed
Start] on the [Transmission
Options] screen.
2. Select the required options.
3. Select [Save].
Priority Send
• Off - Disables the feature.
• On - Sends or polls the job prior to the already stored documents.
Delayed Start
• Off - Disables the feature.
• On - Applies the delayed start time. When you select this option, [Start Time] is
displayed at the right side of the screen.
Start Time
Displays the [Delayed Start - Start Time] screen where you can specify the delayed
start time.
[Delayed Start - Start Time] Screen
Allows you to set the delayed start time using a 12-hour or 24-hour format. You cannot
specify a date for transmission.
NOTE: The format of the start time can be set on the [Machine Clock/Timer] screen in
the [System Settings]. [AM]/[PM] is displayed only when the 12-hour format is used.
For more information, refer to Machine Clock/Timers in the Setups chapter on
page 221.
Downloaded From ManualsPrinter.com Manuals

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English