Xerox WorkCentre 7132 User Guide

Scan Mode Settings
Xerox WorkCentre 7132 User Guide 269
Output Size Defaults
This feature allows you to configure or change the output size buttons displayed when
[Auto %] is selected in the [Reduce/Enlarge] feature on the [Layout Adjustment]
screen.
1. Select [Output Size Defaults] on
the [Scan Mode Settings]
screen.
2. Change the required settings.
Use the scroll buttons to switch
between screens.
3. Select [Close].
Output Size 1 to 8
A/B Series Size
Specifies standard document sizes in A/B series size.
Inch Size
Specifies standard document sizes in inches.
Others
Specifies other miscellaneous sizes.
Reduce/Enlarge Presets
This feature allows you to configure or change the reduction/enlargement ratio buttons
that appear when [Preset %] is selected on the [Reduce/Enlarge] feature on the [Layout
Adjustment] screen.
1. Select [Reduce/Enlarge
Presets] on the [Scan Mode
Settings] screen.
2. Change the required settings.
Use the scroll buttons to switch
between screens.
3. Select [Close].
R/E Preset 1 to 7
Preset %
Specifies the reduce/enlarge ratios assigned to each of the seven buttons. Select from
25 options in the range of 25-400%.
Downloaded From ManualsPrinter.com Manuals

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English