Xerox WorkCentre 7132 User Guide

Copy
Xerox WorkCentre 7132 User Guide 51
Reduce/Enlarge
This feature allows you to reduce or enlarge copies by a specified ratio within the range
of 25–400%.
1. Select the [Reduce/Enlarge]
feature on the [Copy] screen.
Reduce/Enlarge
Displays the [Reduce/Enlarge] screen.
[Reduce/Enlarge] Screen
Allows you to select or specify the reduction/enlargement ratio for both the width and
length.
1. Select [Reduce/Enlarge] on the
[Copy] screen.
2. Select the required option.
3. Select [Save].
Preset %
• 100% - Selects output at the same size as the original document.
• Auto % - Automatically reduces/enlarges the image of the document to fit on the
paper size selected.
• Presets - Allows you to select from seven preset enlargement/reduction ratios. The
presets are set up by the Key Operator.
• Copy All - Reduces the image of documents slightly from the selected reduction/
enlargement ratio to copy the complete image onto the paper.
Variable %
Allows you to specify a reduction/enlargement ratio using the screen keypad or the
scroll buttons on the touch screen within the range of 25-400% in 1% increments.
Independent X-Y %
Allows you to specify a reduction/enlargement ratio individually for the width and length
within the range of 25-400% in 1% increments.
• Auto - Automatically specifies the reduction/enlargement ratio individually for the
width and length to fit on the paper.
• Copy All X-Y% - Enables the [Auto] feature, and reduces the image of the document
slightly from the reduction/enlargement ratio to copy the complete image of the
document onto the paper.
Downloaded From ManualsPrinter.com Manuals

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English