Xerox WorkCentre 7132 User Guide

Common Settings
Xerox WorkCentre 7132 User Guide 237
Millimeters/Inches
Specifies [Millimeters] or [Inches] as the unit for entering document or scan sizes.
Keyboard Input Restriction
Specifies whether the machine is to allow entry of standard ASCII characters only, or
characters including those specific to the selected language. Select [On (Standard
ASCII Only)] to display standard ASCII characters only on the keyboard screen.
Operation of Up/Down Buttons
Specifies whether the machine is to allow the up and down buttons (scroll buttons) on
the touch screen to provide fast scrolling when they are pressed continuously.
Display Consumables Screen
Specifies whether or not to display the consumables screen, and the event that causes
the machine to display the consumables screen.
Overwrite Hard Disk
Specifies whether or not to enable overwriting the hard disk. If enabled, random data
will be written to the disk area released by the data deletion to avoid illegal data
retrievals from the hard disk. You can select the number of overwrite passes from one
time or three times. This also overwrites temporarily saved data such as copy
documents.
Data Encryption
Specifies whether to enable encoding when data is saved to RAM, NV-RAM, backed
up memory chips, or the hard disk of the machine. Enter a 12-digit encoding code using
the screen keyboard. The default encoding code is “111111111111”. When the setting
is changed, the machine needs to be switched off and then on to make it effective. Note
that all data corresponding to the encoding then will be initialized.
NOTE: Encrypted data cannot be recovered if a problem occurs in the hard disk.
Service Representative Restricted Operation
Specifies whether the Service Representative has full access to the security features
of the machine, including the ability to change Key Operator settings.
B6 LEF 182.0 128.0
B6 SEF 128.0 182.0
Size
Width
(mm)
Length
(mm)
Tray 1-3 (except for TTM) Tray 2, 3 (TTM)
A/B Series
(8 x 13”)
A/B Series A/B Series
(8K/16K)
A/B Series
(8 x 13”/8 x 14”)
Inch Series
A/B Series
(8 x 13”)
A/B Series A/B Series
(8K/16K)
A/B Series
(8 x 13”/8 x 14”)
Inch Series
Downloaded From ManualsPrinter.com Manuals

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English