Xerox WorkCentre 7132 User Guide

10 Setups
244 Xerox WorkCentre 7132 User Guide
Build Job - Separators Tray
Specifies the default for [Copy Job]>[Chapter Start]>[Separators Tray] of the [Build
Job] feature on the [Job Assembly] screen.
Copy Control
This feature allows you to implement operational control of the various copy features.
1. Select [Copy Control] on the
[Copy Mode Settings] screen.
2. Change the required settings.
Use the scroll buttons to switch
between screens.
3. Select [Close].
Memory Full Procedure
Specifies the default process to execute if the hard disk becomes full while reading
documents. A message asking how to process the data read up to that point is
displayed. You can predefine a processing method to be performed after the message
has been displayed for a specified period. If you select [Cancel Job], the data will be
discarded. If you select [Run Job], the data read up to that point will be processed.
Maximum Stored Pages
Specifies the maximum number of pages that can be stored in memory when you copy
documents. Select a number in the range from 1 to 999.
Auto Paper Off
Specifies the paper tray used when you cancel [Auto] in the [Paper Supply] feature by
selecting [Auto %] or [Independent X-Y%] in the [Reduce/Enlarge] feature.
Mixed Sized Originals - 2 Sided Copy
Specifies the copy operation when a different paper size is detected when making 2
sided copies from mixed sized originals. Select [Copy to new sheet] to print to a new
page. Select [Copy to Side 2] to copy onto the reverse side of the current page.
NOTE: Some areas of the image may be cropped if you select [Copy to Side 2].
Fine-tune 100%
Specifies the actual magnification ratio for making copies on the document glass when
[100%] is selected on the [Reduce/Enlarge] screen. Fine tune the value in the range of
98.0 to 102.0%.
Background Suppress (Photo & Text)
Specifies the background suppression level for the [Image Enhancement] feature when
[Photo & Text] is selected on the [Original Type] screen when making color copies.
Downloaded From ManualsPrinter.com Manuals

Xerox WorkCentre 7132 Specifications

General

Functions	Print, Copy, Scan, Fax
Printing Technology	Laser
Print Speed (Black)	32 ppm
Print Resolution	1200 x 1200 dpi
Max Resolution (BW)	1200 x 1200 dpi
Duplex Printing	Yes
Scan Resolution	600 x 600 dpi
Copier Max Resolution	600 x 600 dpi
Connectivity	Ethernet, USB
Scanner Type	Flatbed
Fax Speed	33.6 Kbps
USB Connectivity	USB 2.0
Media Size	A4, Letter, Legal
Copy Speed (Black)	32 ppm
Display	Color Touch Screen
Network Connectivity	Ethernet