Xerox WorkCentre 7132 User Guide

Network Settings
Xerox WorkCentre 7132 User Guide 259
SMB Server 1 to 5
• Server Domain Name - Specifies the domain name.
• Server IP Address - Specifies the IP address.
• Server Name - Specifies the server name. Enter a name of up to 64 characters.
PKI (Public Key) Settings
This feature allows you to set up the HTTP-SSL/TLS and S/MIME settings.
NOTE: It is necessary to specify the device certificate for the machine in order to
specify the HTTP-SSL/TLS communications and S/MIME settings. For more
information, refer to the System Administration Guide.
1. Select [PKI (Public) Settings] on
the [Network Settings] screen.
2. Change the required settings.
3. Select [Close].
HTTP - SSL/TLS Settings
Specifies the SSL/TLS settings.
Device Certificate - Server
Specifies the server certificate to attach to the E-mail address.
SSL/TLS Communication
Specifies whether to enable SSL/TLS communications.
SSL/TLS Port Number
Specifies the SSL/TLS communications port number.
Device Certificate - Client
Specifies the client certificate to attach to the E-mail address.
Remote Server Certificate Validation
Specifies whether to enable validation of the remote server certificate.
S/MIME Settings
Specifies the S/MIME settings. Use the scroll bars to switch between screens.
Device Certificate - S/MIME
Specifies the S/MIME certificate to attach to the E-mail address.
Downloaded From ManualsPrinter.com Manuals

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English