Xerox WorkCentre 7132 User Guide

10 Setups
268 Xerox WorkCentre 7132 User Guide
Scan-to-FTP/SMB Defaults
This feature allows you to configure or change the default settings for scanning and
sending documents to specified destinations through the FTP or SMB protocol.
1. Select [Scan-to-FTP/SMB
Defaults] on the [Scan Mode
Settings] screen.
2. Change the required settings.
3. Select [Close].
Transfer Protocol
Specifies the default transfer protocol.
Original Size Defaults
This feature allows you to configure or change the scan size buttons on the [Original
Size] feature on the [Layout Adjustment] screen.
1. Select [Original Size Defaults]
on the [Scan Mode Settings]
screen.
2. Change the required settings.
Use the scroll buttons to switch
between screens.
3. Select [Close].
Scan Size 1 to 11
A/B Series Size
Specifies standard document sizes in A/B series size. Use the scroll buttons to switch
between screens.
Inch Size
Specifies standard document sizes in inches. Use the scroll buttons to switch between
screens.
Others
Specifies other miscellaneous sizes. Use the scroll buttons to switch between screens.
Variable Size
Specifies a user-defined size set using the scroll buttons.
Downloaded From ManualsPrinter.com Manuals

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English