Xerox WorkCentre 7132 User Guide

Common Settings
Xerox WorkCentre 7132 User Guide 231
Target
Specifies the range of jobs affected by the gradation adjustment.
Reports
This feature allows you to specify how reports are to be automatically printed.
1. Select [Reports] on the
[Common Settings] screen.
2. Change the required settings.
Use the side tabs to switch
between screens.
3. Select [Close].
Print Report Button
Specifies whether to display the [Print Report/List] feature on the [Billing Meter/Print
Report] tab of the [Machine Status] screen. Refer to Print Report/List in the Machine
Status chapter on page 319.
Job History Report
Specifies whether to automatically print a Job History Report for every 50 jobs.
Activity Report
Specifies whether to automatically print an Activity Report for every 100 fax jobs. An
Activity Report shows the result of transmissions and receptions.
Transmission Report - Undelivered
Specifies whether to automatically print an Undelivered-Transmission Report for fax
jobs. An Undelivered-Transmission Report shows the list of documents where
transmission failed.
Transmission Report - Cancelled
Specifies whether to automatically print a Cancelled-Transmission Report for fax jobs
when fax transmission jobs are interrupted. A Cancelled-Transmission Report shows
the list of documents where transmission was cancelled.
Mailbox Report
Specifies whether to automatically print a Mailbox Report for fax jobs. A Mailbox Report
shows the accumulation of documents in the Private Mailbox. For more information,
refer to Remote Mailbox in the Fax/Internet Fax chapter on page 108.
Downloaded From ManualsPrinter.com Manuals

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English