Copying Procedure
Xerox WorkCentre 7132 User Guide 47
Document Glass
The document glass is used for a single page or bound document up to 297 mm (11.7
inches) for width and up to 432 mm (17 inches) for length.
NOTE: Before you place the document on the document glass, make sure that the
touch screen is ready. If you place the document on the document glass before the
touch screen is ready, the paper size may not be detected correctly.
1. Raise the document feeder or
the document glass cover.
2. Place the document face down
on the document glass, aligned
with the tip of the registration
arrow near the top left of the
document glass.
3. Lower the document feeder or
the document glass cover.
2. Select the Features
The features available on the [Copy] screen are those used most often.
NOTE: Only those features relevant to the machine configuration will be available.
1. Press the <All Services> button
on the control panel.
2. Select [Copy] on the
[All Services] screen. Ensure
that the [Copy] tab screen is
displayed.
<Clear All> button<All Services> button
Downloaded From ManualsPrinter.com Manuals