Xerox WorkCentre 7132 User Guide

Login Setup/Auditron Administration
Xerox WorkCentre 7132 User Guide 297
1. Select [System Administrator’s
Password] on the [System
Administrator Settings] screen.
2. Enter a new System
Administrator Password.
Use the numeric keypad on the control panel or select [Keyboard] to display the screen
keyboard.
3. Select [Next].
4. Enter the same System Administrator Password as you entered in step 2.
5. Select [Save].
Maximum Login Attempts
This feature allows you to deny access when an incorrect System Administrator ID is
entered the selected number of times. You can select this number in the range from 1
to 10.
1. Select [Maximum Login
Attempts] on the [System
Administrator Settings] screen.
2. Perform the necessary
operations.
3. Select [Save].
Login Setup/Auditron Administration
The Auditron feature is used to prevent the machine from being used by unauthorized
users, impose different restrictions on individual users (accounts), and track the total
number of copies, faxes, scanned pages, and prints for each account. When the
Auditron feature is active, users need to enter a correct user ID, or both user ID and
password, in order to use the machine. Using authenticated user IDs, the Auditron
identifies different accounts and tracks jobs done with each account. The [Login Setup/
Auditron Administration] screen allows you to start configuring various Auditron
settings. For more information, refer to the following.
Create/Check User Accounts – page 298
Reset User Accounts – page 299
System Administrator Meter (Copy Jobs) – page 300
User Details Setup – page 301
Charge Print Settings – page 301
Password Entry from Control Panel – page 302
Login Setup/Auditron Mode – page 302
Downloaded From ManualsPrinter.com Manuals

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English