Scan Mode Settings
Xerox WorkCentre 7132 User Guide 265
Unregistered Forms
Specifies whether to abort a job which is specified to use form overlay when the form
is not found (not registered) in the machine.
Print User ID
Specifies whether to print the user ID or the position to print the ID, when printing using
a printer driver to distinguish between users. The user ID is a maximum of 64
characters set by the printer driver. For more information, refer to the printer driver
online help.
Banner Sheet
Specifies whether to add sorting sheets (banner sheets). This is effective for sorting/
classifying to differentiate printed sheets from the rest. You can add banner sheets
before and/or at the end of the print job.
NOTE: Even if using the Finisher, banner sheets will not be stapled. Banner sheets
from print jobs from a Macintosh do not display the document name. Printing banner
sheets also increments the billing meter.
Banner Sheet Tray
Specifies a tray for the banner sheets.
PostScript Default Color
Specifies the output color default for AdobePS and PDF.
PostScript Paper Supply
Specifies whether to use the DMS (Deferred Media Selection) feature of PostScript or
to select a paper tray.
PostScript Font Absence
Specifies whether to substitute fonts automatically and continue the print job when a
required font is not found. The substitute font is Courier.
NOTE: This feature is available only when PostScript is loaded.
PostScript Font Substitution
Specifies whether to use ATCx during font substitution.
NOTE: This feature is available only when PostScript is loaded.
Scan Mode Settings
This section describes the features that allow you to configure or change machine
settings specific to the scan features. For more information, refer to the following.
Scan Defaults – page 266
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
