Xerox WorkCentre 7132 User Guide

Emulation Parameters
Xerox WorkCentre 7132 User Guide 163
PDF Direct Printing
Staple
164 0: None (Default)
1: Top left
2: Top double
3: Top right
4: Left double
5: Right double
6: Bottom left
7: Bottom double
8: Bottom right
9: Center
Sets the stapling position.
Manual
Feed Tray
Check
Indicator
165 0: None
1: Yes (Default)
Sets the manual feed tray indicator.
Pen Width
(No. 0–15)
800–
815
0-255: 0 to 25.5 mm (3: Default)
Sets the width of the pen in 0.1 mm units.
Line End
Shape
(No. 0–15)
850–
865
0: Cut (Default)
1: Round
2: Rectangular
Sets the line end shape.
Line
Intersects
(No. 0–15)
900–
915
0: None (Default)
1: Intersect
2: Round
3: Cut
Sets the line intersect shape.
Pen Color
(No. 0–15)
950–
965
0-255: Color
0-100: Black and white
Sets the color density. The smaller the number, the lighter the color.
Parameter Item No. Value
Parameter Item No. Value
Print Sets
401
1-999 (Default: 1): Specify the number of print sets.
2 Side Print
402
0: Off (Default)
1: LEF Binding
2: SEF Binding
Specifies which edge of paper is to be bound for double-
sided printing.
Downloaded From ManualsPrinter.com Manuals

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English