Xerox WorkCentre 7132 User Guide

15 Problem Solving
430 Xerox WorkCentre 7132 User Guide
Screen Messages
Along with fault codes, the following messages are displayed on the touch screen on
some occasions.
Xerox Welcome Center
For additional help. If you need any additional help on using your WorkCentre
copier/printer, you can:
1) Refer to this User Guide
2) Contact the Key Operator
3) Visit our Customer Web Site at www.xerox.com or contact the Xerox Welcome
Center.
Please have your serial number at hand when contacting Xerox.
The Welcome Center will want to know the following information: The nature of the
problem, the serial number of the machine, the fault code (if any), as well as the name
and location of your company. Follow the steps below to look up the serial number of
the machine.
134-210
134-211
An error occurred when using the fax. Turn the power off and on. Contact the
Xerox Welcome Center if the problem persists.
Code Description and Remedy
Message Description and Remedy
A fault has occurred.
Switch off the machine. Ensure that the
screen disappears before switching it on.
If the problem persists, call for service.
A fault has occurred. Switch off the machine
and wait until the touch screen is turned off
completely, and then restart the machine. If
the problem persists, write down the fault
code (xxx-yyy) displayed on the screen.
Switch off the machine and contact the Xerox
Welcome Center.
A fault has occurred. The machine has
rebooted. If the problem persists, call for
service.
The machine was restarted due to a fault.
Resume normal operations. If the problem
persists, contact the Xerox Welcome Center.
Processing has been cancelled due to an
error.
See User Guide for information on fault code.
The machine operation has stopped due to a
fault. Restart the job.
Downloaded From ManualsPrinter.com Manuals

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English