EasyManuals Logo

Xerox WorkCentre 7132 User Guide

Xerox WorkCentre 7132
468 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #429 background imageLoading...
Page #429 background image
Fault Codes
Xerox WorkCentre 7132 User Guide 429
116-771
116-772
116-773
116-774
116-775
116-776
116-777
116-778
The parameter values were corrected, because the machine encountered a
problem when printing the data. If the received image is incomplete or
damaged, ask the other party to check the image or to resend the data. When
Internet Fax forwarding is enabled, check with the recipient if they received the
image intact.
116-780 There is a problem with the document attached to the received e-mail. Check
the attached document.
116-790 1. If the operator stops stapling while printing a confidential fax or confidential
iFax document, the first copy is printed without staples. Staple the first copy
manually, or otherwise do not stop stapling while printing.
2. If the operator stops stapling in all other cases: all copies are printed without
staples. Check that the stapling position is correctly specified, and perform
the same operation again.
123-400 The machine has detected a software-related problem. Turn the power off and
on. Contact the Xerox Welcome Center if the problem persists.
124-701 Due to a malfunction in the specified tray (side tray), the output destination was
changed to the center output tray. Contact the Xerox Welcome Center. A
different paper tray can still be used.
124-702 Due to a malfunction in the specified tray (finisher tray), the output destination
was changed to the center output tray. Contact the Xerox Welcome Center. A
different paper tray can still be used.
133-210
133-211
133-212
133-213
133-214
133-215
133-216
133-217
133-218
133-219
133-220
133-221
133-222
133-223
133-224
An error occurred when using the fax. Turn the power off and on. Contact the
Xerox Welcome Center if the problem persists.
133-226 A country code not compatible with the machine that was specified. Contact the
Xerox Welcome Center.
133-280
133-281
133-282
133-283
An error occurred when using the fax. Turn the power off and on. Contact the
Xerox Welcome Center if the problem persists.
Code Description and Remedy
Downloaded From ManualsPrinter.com Manuals

Table of Contents

Other manuals for Xerox WorkCentre 7132

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox WorkCentre 7132 and is the answer not in the manual?

Xerox WorkCentre 7132 Specifications

General IconGeneral
BrandXerox
ModelWorkCentre 7132
CategoryAll in One Printer
LanguageEnglish

Related product manuals