7Print
154 Xerox WorkCentre 7132 User Guide
Output Destination
Allows you to select the output tray.
Print Mode
Specifies the priority for printing. You can select [Standard] or [High Speed]. If you
select [High Speed], the print speed has increased priority. If you select [Standard], the
output quality has highest priority.
Brightness
Adjusts the brightness of output prints. Specify the rate in the range -5 to +5 using the
keyboard or slider bar.
Screen
Specifies the screening process used for bitmap images.
Detailed Settings
Other printer driver options include draft mode printing, transparency separators,
image enhancement, color balance, image shift, covers, and booklet creation.
Printer Status
The printer status can be monitored using the Bi-Directional Communication Window,
displayed by selecting the [Status] button on the [Paper/Output] tab.
Bi-Directional Communication Setup
This section describs the Bi-Directional Communication setup procedure in order to
monitor the printer status.
NOTE: The Bi-Directional Communication function is supported on the Windows
2000, Windows XP, and Windows Server 2003 operating systems.
NOTE: For more information on using the PostScript driver, refer to the Operation with
Windows 2000, Windows XP and Windows Server 2003 chapter in the PostScript
User Guide.
NOTE: If any of the following occurs, the Bi-Directional Communication function is
automatically disabled, and will need to be setup again.
– If the device configuration (for example, Memory Capacity) is changed,
– If [Get Information from Printer] is selected, and communication fails,
– If the [Enable Bi-Directional Communication] check box is selected, and
communication fails.
To setup the Bi-Directional Communication function:
1. Select [Properties] for the print driver.
2. Open the [Option] tab.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
