Xerox WorkCentre 7132 User Guide

12 Machine Status
318 Xerox WorkCentre 7132 User Guide
1. Select [Password] on the [PDF]
screen.
2. Enter a password using the
keyboard.
3. Select [Next].
4. Re-enter the password.
5. Select [Save].
Fax Receiving Mode
This feature allows you to set the fax reception mode: Manual Receive or Auto Receive.
1. Select [Fax Receiving Mode] on
the [Machine Status] screen.
Manual Receive
Starts receiving a fax or polling after you have answered the call and confirmed it is a
fax.
Auto Receive
Receives a fax automatically.
Billing Meter/Print Report
This section describes the features that allow you to view the billing meter information,
and also specify the output sequence for various reports and lists.
NOTE: The Print Report/List feature is enabled by setting the [Print Report Button]
setting to Enabled in the [Common Settings] > [Reports] feature. For more
information, refer to Reports in the Setups chapter on page 231.
For more information, refer to the following.
Billing Meter – page 319
Print Report/List – page 319
1. Press the <Machine Status>
button on the control panel.
2. Select the [Billing Meter/Print
Report] tab.
3. Select the required option.
Downloaded From ManualsPrinter.com Manuals

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English