Xerox WorkCentre 7132 User Guide

10 Setups
254 Xerox WorkCentre 7132 User Guide
POP3 Server Password
Specifies the POP3 server password. Enter a password of up to 32 characters and then
re-enter the password for confirmation.
POP Password Encryption
Specifies whether to enable the POP password encryption using APOP.
SMTP Server Settings
This feature allows you to set up the SMTP server settings, such as port number, IP
address, server name and a password. Use the scroll bars to switch between screens.
SMTP Server Setup
Specifies the setup method for the SMTP server.
SMTP Server IP Address
Specifies the SMTP server IP address. This entry is required only when [By IP Address]
is selected on the [SMTP Server Setup] screen.
SMTP Server Name
Specifies the SMTP server name. Enter a server name of up to 256 characters. This
entry is required only when [By Server Name] is selected on the [SMTP Server Setup]
screen.
SMTP Server Port Number
Specifies the SMTP server port number.
E-mail Send Authentication
Specifies the SMTP server authentication method. If you select [POP before SMTP],
POP server authentication is required before transmitting e-mails to the SMTP server.
If you select [SMTP AUTH], the SMTP server authentication is enabled.
SMTP AUTH Login Name
Specifies the SMTP AUTH login name. Enter a login name of up to 64 characters. This
entry is required only when [SMTP AUTH] is selected on the [E-mail Send
Authentication] screen.
SMTP AUTH Password
Specifies the SMTP AUTH password. Enter a password of up to 36 characters and then
re-enter the password for confirmation. This entry is required only when [SMTP AUTH]
is selected on the [E-mail Send Authentication] screen.
Downloaded From ManualsPrinter.com Manuals

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English