Xerox WorkCentre 7132

Emulation Parameters
Xerox WorkCentre 7132 User Guide 161
Print
Quantity
Setup
115 0: Protocol (Default)
1: Panel
2: Command
Sets the method for specifying the print quantity.
HP-GL
Mode
150 0: HP-GL (Default)
1: HP-GL/2
Sets the page description language (PDL).
Hard Clip
151 0: Standard
2: Paper (Default)
Sets the hard clip area. The [Standard] hard clip area for A4, A3, Letter, and
Ledger is the same as for Hewlett Packard HP7550A. For other sizes, the
hard clip area is the machine printable area. The [Paper] hard clip area is the
same size as the paper.
Eject
Command
SP
152 0: OFF (Default)
1: ON
Sets whether the command is processed as an eject command
Eject
Command
SPO
153 0: OFF
1: ON (Default)
Sets whether the command is processed as an eject command
Eject
Command
NR
154 0: OFF (Default)
1: ON
Sets whether the command is processed as an eject command
Eject
Command
FR
155 0: OFF (Default)
1: ON
Sets whether the command is processed as an eject command
Eject
Command
PG
156 0: OFF (Default)
1: ON
Sets whether the command is processed as an eject command
Eject
Command
AF
157 0: OFF (Default)
1: ON
Sets whether the command is processed as an eject command
Eject
Command
AH
158 0: OFF (Default)
1: ON
Sets whether the command is processed as an eject command
Parameter Item No. Value
Downloaded From ManualsPrinter.com Manuals