Xerox WorkCentre 7132 User Guide

8 CentreWare Internet Services
178 Xerox WorkCentre 7132 User Guide
Pool
This page allows you to set up or change the pool setups.
General Settings
This page allows you to specify whether to print the log-in and/or domain names on the
job log list. Unchecked items will not be displayed on a job log.
User Information
Select the items to be listed on a job log.
•User Name
• Domain Name
Name Enter the name of the repository setup.
Protocols Select [FTP] or [SMB] for a transfer protocol.
Server Name Enter the name of the server to transfer scanned data.
Port Number Specify the port number.
Shared Name When [SMB] is selected in [Protocols], you can enter the shared
name.
Remote Path Enter the path in the server where the data will be saved.
User Name Enter the user name.
Password Enter the password for the user name.
Re-enter Password Re-enter the password for verification.
Protocols Select [FTP] or [SMB] for a transfer protocol.
Server Name Enter the name of the server to transfer scanned data.
Port Number Specify the port number.
Shared Name When [SMB] is selected in [Protocols], you can enter the shared
name.
Remote Path Enter the path in the server where the data will be saved.
User Name Enter the user name.
Password Enter the password for the user name.
Re-enter Password Re-enter the password for verification.
Polling Settings Select the check box to enable polling.
Polling Interval If polling is enabled, enter a polling interval in the range 0 to
1092:15 in 1-minute increments.
Start Polling If polling is enabled, enter a start time in the range 0 to 23:59 in 1-
minute increments.
Downloaded From ManualsPrinter.com Manuals

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English