Xerox WorkCentre 7132 User Guide

8 CentreWare Internet Services
200 Xerox WorkCentre 7132 User Guide
Protocol Settings SMTP
Server Settings:
Server Address – Enter the SMTP server address. Up to 128
characters can be entered, including. (period) and - (hyphen).
Port Number – Specify the SMTP port number.
Send Authentication – Select whether and how users are required to
authenticate before sending e-mail using an SMTP server.
• Off: User authentication is not required to use an SMTP server.
• POP before SMTP: POP server authentication is required before
using an SMTP server.
• SMTP Authentication: SMTP server authentication is required to
send e-mail.
User Name – Specify the user ID for SMTP authentication.
Password – Specify the password for SMTP authentication.
Outgoing Mail Settings:
Maximum E-mail Size – Allows you to specify the maximum e-mail
size.
Max.Number of Pages for Split Send – Allows you to set the size of
outgoing e-mail in pages.
POP3
Server Settings:
Server Address – Enter the POP3 server address. Up to 128
characters can be entered, including periods (.) and hyphens (-).
Port Number – Specify the POP3 port number.
POP Receive Authentication – Select to enable APOP
authentication.
User Name – Enter the POP user address.
Password – Enter the POP user password.
Incoming Mail Settings:
POP3 Server Check Interval – Enter the interval to check the POP3
server between 1 and 120 minutes in 1 minute increments.
Feature Setting items
Downloaded From ManualsPrinter.com Manuals

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English