Support
Xerox WorkCentre 7132 User Guide 207
Support
Click [Change Settings], enter the new name and URL for the website, then click
[Apply].
NOTE: If the Administrator Mode is enabled, you will be prompted to enter the user ID
and password before changes are made. The default user ID is “11111”, and the
password is “x-admin”.
Error History
This page displays the Error History. It contains the following details on jobs where an
error has occurred. Click the [Maintenance] tab on the Main Panel on the home page.
• Date&Time - Displays the date and time when the error occurred. Information is
displayed in the form of mm/dd/yyyy hh:mm.
• Error Code - Displays the error code. Information is displayed in the form of xxx-yyy.
System Administrator Settings
The system administrator page is set to set the system administrator login and
password.
• Administrator Name - Specify the system administrator user ID.
• Administrator Password - Specify the system administrator password. Re-enter the
password for confirmation.
• Maximum Login Attempts - Specify the number of system administrator login
attempts before reporting a login failure.
Pool Server Settings
This sets the pool server related information for job flow services.
• Pool Server - Select to enable the pool server.
• Login Details from Device - Select whether to use the Login Details defined by the
device.
• User Name - Specify the user name.
• Password - Specify the user password.
Remote Access
This sets the remote access related information.
• Number - Displays the connection destination number.
• Server Name - Specify the connection destination name.
• URL - Specify the connection destination URL.
• Description - Describes the connection destination.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
