Xerox WorkCentre 7132 User Guide

9 Paper and Other Media
216 Xerox WorkCentre 7132 User Guide
O: Available
X: Not available
*1: Side 2 Paper: Refers to the paper already printed on one side (i.e. scrap paper).
*2: Full color is not available.
*3: Only 106-128g/m
2
paper fed from Tray 1, 2, or 3 is available.
*4: Coated 1, Coated 2, and Labels should be fed one by one from a paper tray.
*5: Heavyweight 2 or coated 2: If heavyweight or coated paper is not loaded into the
machine, the paper needs to be slightly curled upward.
*6: Paper having coated surface on one side should not be fed from Bypass tray.
• When printing onto postcard or envelope, Heavyweight 2 should be selected, and
the size should be specified.
• Depending on heavyweight paper, the machine cannot load Short Edge Feed. In
that case set the paper Long Edge Feed.
• Depending on the type of paper used and the operating environment, paper may not
feed to the machine properly, or print quality may be negatively affected.
Coated 1
*4, *6
106-169
(28 lb. bond-
60 lb. cover)
OO OO
*2
O
*3
O
Coated 1 F 106-128
(28-34 lb)
OO XO
*2
OO
Coated 1 Side 2 106-169
(28-60 lb.)
XXOXXO
Coated 2
*4, *5, *6
170-216
(65-80 lb. cover)
OO OXXO
Coated 2 Side 2 170-216
(65-80 lb. cover)
XXOXXO
Labels
*4, *6
106-169
(28 lb. bond-
60 lb. cover)
OO OXXO
Transparency – O O O X X O
Paper Type
Weight g/m
2
(lb)
Tray 1
Tray 2, 3
(Two Tray
Module/TTM)
Tray 5
(Bypass)
Duplex
Module
Office
Finisher
Integrated
Office
Finisher
Downloaded From ManualsPrinter.com Manuals

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English